SAS RAID Expander-CLI
16
========================================
Firmware Revision Information:-
========================================
Boot Image:
Revision: 100.BD.00.0A 12/05/13
Firmware Family: 0 OemFamily: 0
Fast Boot: Yes Image Address: 0x10000000
Firmware Copy 1:
Revision: 100.BD.01.0A 01/06/14
Firmware Family: 0 OemFamily: 0
Fast Boot: Yes Image Address: 0x10100000
Firmware Copy 2: [Active]
Revision: 100.BD.01.0A 01/06/14
Firmware Family: 0 OemFamily: 0
Fast Boot: Yes Image Address: 0x10200000
HAL Revision: 0.1.0.0 SES Revision: 0.1.0.0 SCE Revision:
0.1.0.0
• SPIN Command
The spin command defines the mode of staggering SATA drive
spin-up function connected on the expander box. This command
gives expander box the ability to spin up the disk drives sequen-
tially or in groups, allowing the drives to come ready at the opti-
mum time without straining the system power supply. Stagger-
ing drive spin-up in a multiple drive environment also avoids the
extra cost of a power supply designed to meet short-term startup
power demand as well as:
Syntax
CLI> spin [ Delay(D)[ms] Num(D) ]
Expander issues the spin up the drives by [ Num] drives with
[Delay] ms.
Example1:
CLI>spin
