SAS RAID Expander-CLI
13
SLOT 09
5
6G
6G 12G
3G SATA
5011B469-189AE005
SLOT 10
4
6G
6G 12G
3G SATA
5011B469-189AE004
SLOT 11
6
3G
3G 12G
3G SAS
500000E0-168F8E92
SLOT 12
7
3G
3G 12G
3G SAS
500000E0-168F8E99
NOTE: 1. If DHPM is enabled, it will keep NLR=12G.
• EDFB Command (Same as “DHPM”)
From FW 1.26 version, EDFB default only supports for SATA drive
(from Chip vendor suggestion). Once user update this FW, the
EDFB “on” mode is translated to EDFB “sata” mode. That means
3G/6G SAS drive won’t support EDFB.
Use for 3G/6G SATA drive
speed up as 12G drive performance. DataBolt™ Bandwidth Op
-
timizer is designed to help facilitate the industry transition to
12Gb/s SAS-enabled systems by allowing users to take advantage
of 12Gb/s speeds while utilizing existing 6Gb/s drives or back
-
planes.
Syntax
CLI>edfb [sata | off] [i,j,..]
on - turn on all drive slot as 12G performance mode.
off - turn off all drive slot 12G performance mode.
i,j,.. - turn on/off drive slot i,j, …12G performance mode.
Example:
CLI>help edfb
Drive High Performance edfb { [sata | off] [i,j,..] }
CLI>link
ArrayDevice Element (0x17):
========================================
NAME
PHY ORG NLR MAX MIN
TYPE
ADDRESS
SLOT 01
13
6G
6G 12G
3G SATA
5001B469-189AE00D
SLOT 02
12
6G
6G
12G
3G SATA
5011B469-189AE00C
SLOT 03
14
6G
6G 12G
3G SATA
5011B469-189AE00E
SLOT 04
15
6G
6G 12G
3G SATA
5011B469-189AE00F
