SAS RAID Expander-CLI
10
Example:
CLI>pass
Old Password:****
New Password:****
Verify New Password:****
Password Changed But Not Save Permanently!
Note, use CLI command “st” to keep permanently.
• LO Command
To exit the selected expander box CLI shell, use the lo command.
Syntax
CLI> lo [Enter]
Example:
CLI>lo
Password:
• LINK Command
The link command allows you to set the operate device link rate
that has been connected on expander. Typical parameters include:
Max and Min disk speed connected the SAS expander box and
High and Low external cable link speed connected the SAS ex
-
pander box.
1. Set external cable link speed rate
Syntax
CLI>link c[0] High Low]
Index: c[0] External Cable Index
The cable c0 is view from right to left or start from top to bot-
tom.
High-Rate, Low-Rate: [11|10|9] or [12g|6g|3g]
PS. Pls. Save Config. & Reboot To Take Effect
CLI>st
