ARCHTTP PROXY SERVER INSTALLATION
112
5.3 For FreeBSD
You must have administrative level permissions to install 6Gb/s
SAS RAID software. This procedure assumes that the 6Gb/s SAS
RAID hardware and FreeBSD are installed and operational in your
system.
The following details the FreeBSD installation procedure of the 6Gb/
s SAS RAID controller software.
1. Insert the RAID controller software CD in the CD-ROM drive.
2. Copy <CD-ROM>\PACKAGES\FreeBSD\http directory to local
The next following step is the same with Linux. Please see section
5.2 For Linux.
5.4 For Solaris 10 X86
Please refer to the “readme.txt“ file on the software CD or website:
http://www.areca.com.tw. The step is same with Linux. Please see
section 5.2 For Linux.
Press CTRL-C to exit program!!
##############################
Controller [1] Http: New client [9] accepted
Controller [1] Http: New Recv 243 bytes
Controller [1] Http: Send [174] bytes back to the client
See the next chapter detailing the McRAID Storage Manager to
customize your RAID volume set.
(3). If you need the
“
Cfg Assistant
”,
please refer to section 5.6
ArcHttp Configuration.
(4). See the next chapter detailing the McRAID storage manager
to customize your RAID volume set.
For Mozilla user:
Because our management need Java support, so user
may need upgrade to version 1.6 or later.
Summary of Contents for ARC-1880 Series
Page 9: ......
