ARDISAM
9
❒
❒
❒
❒
❒
Install the Drag Stake
1. Insert the drag stake into the top of the depth regulator bracket
with handle facing rearward.
2. Remove detent pin from parts packet.
3. Insert detent pin through depth regulator bracket and top hole of
drag stake--tines should clear the ground.
NOTE:
The drag stake is now in the transport position.
❒
❒
❒
❒
❒
Attach Throttle Lever and
Cable Assembly to
Handlebar
1. Remove throttle lever and cable assembly, and two small slotted
screws, nuts, and lockwashers from parts packet.
2. Insert the throttle lever through the slot in the upper crossbar,
aligning the holes in the lever body with the holes in the crossbar,
Insert screws through the upper crossbar and throttle lever. Install
lockwashers and nuts and tighten with a screwdriver.
UNPACKING AND ASSEMBLY
