ARDISAM
7
❒
❒
❒
❒
❒
Unpack Tiller
For Model 5020D Only
1. Remove handlebars and other loose parts.
Packing list:
❑
parts packet with owner's manual
❑
shift lever rod
❑
drag stake
❑
handlebars
❑
tiller
2. Cut carton open at engine end and lay end
panel flat.
Wheels are shipped in the tilling position, that is, with wheel lockout
butterfly positioned in both the wheel hub and the axle. To roll tiller
from carton:
3. Release both wheels to neutral as follows.
4. Pull knob away from machine. Rotate wheel lockout butterflies to
neutral position by turning them 90
o
.
5. Wheels are now free to rotate.
6. Roll rototiller out of carton.
Wheel lockout butterfly
in tilling position.
Wheel lockout butterflies must always be in the
tilling
position when engine is running. The
only reason to set wheels in the free wheel
position is to move the tiller when the engine
is not running. The wheels act as a brake to
control the travel speed of the tiller.
CAUTION
Do not try to lift the rototiller from the carton.
CAUTION
UNPACKING AND ASSEMBLY
