ARDESTO FHB-2000TW, Instruction Manual

Page: 17 / 30

EN
14
9. The fireguard of this heater is intended to prevent
direct access to the heating elements and must be
in its place while the heater is in use.
10. Your device should not be used with another
device connected to the same power cable or
fuse.
11. The power cord should not be placed on the hot
body of the device or near to it. Do not make an
addition for the supply cable. Otherwise, it may
cause malfunction, electric shock or fire.
12. If your device will not be used for a long time, will
be moved, cleaned or adjusted, unplug the device
and be sure that it is cool.
13. Do not install the fan heater directly under the
socket.
14. Never expose the heating elements to water.
15. The device must be unplugged during installation,
maintenance or repair.
16. While unplugging the supply cable do not pull the
plug from the cable or touch it with wet hands and
be careful not to crush it under heavy objects.
17. Turn off your heater using the function button and
unplug it.
18. Keep your device in a dry and closed area.
19. Perform the periodic maintenance and cleaning
of your device according to the instructions in this
manual.
20. Do not use the heater while you are sleeping or
do not leave it unattended in working condition.
21. Avoid using extension cord, it may cause fire due
to overheating.
22. Use the device on a flat and even surface. The
device should only be used on its floor support.