Notice
: We recommend you to click operation buttons one after the other with
enough time interval to give enough time for DVR unit to execute commands from
client PC. Too fast clicking operation buttons one after the other with too short time
interval may cause system hang-up in client PC.
Notice
: From time to time, connection shall be cut unexpectedly due to conditions of
network line. Whenever it is cut, quit search window by pressing power switch( ),
and then press connect button in live-view window and scan button to enter into
search window again, to continue searching.
Notice
: Compatibility of Remote Viewer Software with different kinds of operating
systems and PC hardware may not be simply specified due to the characteristics of
network that it is much related with not only PC hardware and operating system but
also other software installed on the client PC and conditions of network(internet) line.
Basically, YOKO’ Remote Viewer Software is compatible with typical Windows
operating system from Windows 98 to Windows XP.
Notice
: To see continuous live view, we recommend not to select motion recording in
RECORD SETUP menu of DVR. If it is set at motion recording in SETUP menu of
DVR, image transmission is done only there is motions detected.
Notice
: While you search recorded data using client software in client PC, DVR unit
to which you access via IP network is in playback mode, and no recording is done as
far as you search recorded data. However, while you are in connection with DVR unit
via IP network for live view, DVR unit records as set.
Notice
: While you using client software to see live view via network, please
remember to UN-play multiplexer to avoid unexpected errors occurring.
- 48 -