(5) ALARM/MOTION SETUP
ALARM SETUP : Sets type of sensors connected to DVMR unit.
ALARM SETUP
> ALARM SIGNAL
ALARM DURATION
ELECT LIST TYPE
SELECT , PRESS
: N.C
: 20 SEC
: ALM
Display of ALARM SETUP
OFF : Not in use.
NC : Normal closed. When an event happens, contact is opened.
NO : Normal open. When an event happens, contact is closed.
ALARM DURATION: Duration of recording when an ALARM is activated.
(set time : 10, 20, 30, 40, 50 sec, 1 MIN, 3 MIN, 5 MIN)
SELECT LIST TYPE : “A” indicates Alarm, “L” indicates Loss, and “M”
indicates Motion.
You can select group of events, NONE, A, L, and M, by pressing [left] and
[RIGHT] buttons. If you select NONE, no event list shall be provided.
ALARM LIST SETUP : Shows list of alarms up to 400. If total alarm exceeds
400, it overwrites from the beginning. Alarm list is very useful to manage
DVMR system, in case it is in use in connection with alarm sensors.
- 22 -