Arctiko ULUF Original Operating Instructions Download Page 4

Handling & Transportation

Moving the appliance

 

Lifting, moving and transportation of the appliance without suitable equipment 

may cause personal or material damage. Always use suitable lifting equipment 

to load, unload and move the freezer to load, unload and move the appliance. 

Packaging

- Do not expose the package to rain.

- Always keep the package upright -

  DO NOT BRING THE PACKAGE TO A HORIZONTAL POSITION. 

- Do not expose the package to bumps or shocks. 
- Package contents are fragile.

Unpacking

1. Inspect the packaging carefully for any damage that may have 

occurred during shipping. If damage is observed, report to the shipping 

company and your local Arctiko distributor.

2. Remove all packaging materials, plastic and straps. All packing material is 

entirely recyclable. For more information on where to dispose of waste, 

contact your local authority or recycling station. 

Inactivity for extended period

If the appliance must be switched off for a longer period and stored away, 

please take following precautions. 

- Clean the appliance both inside and outside. 

- Ventilate the appliance and make sure it is completely dry. 

- Disconnect the power cord.

- Leave the door slightly open in order to prevent rot and mold. 

Disposal

In the event of disposal of the appliance, observe relevant legal regulations to 

prevent harmful environmental effects. 

Within the European community, EU directives regulate disposal of 

electrical devices.

This appliance is marked in compliance with the 2002/96/CE European  

Directive, WASTE ELECTRICAL AND ELECTRONIC EQIUPMENT (WEEE).

6

7

!

Disconnect thea power cord before moving the appliance.

 Make 

sure not to damage the power cord. A damaged power cord may 

cause electric shock or fire.

Be careful not to tip over the appliance 

during transport to prevent 

damage or injury.

Plastic bags pose a suffocation risk. 

Keep away from children.

!

Disconnect the power plug when the appliance is not in use for 

a longer period. 

Keeping the connection may cause electric shock, 

current leakage or fire due to the deterioration of insulation.

If the appliance is to be stored unused in an unsupervised area for an 

extended period,

 ensure that children do not have access and that 

doors cannot be closed completely.

!

OFF

Disconnect power supply before operation. 

Risk of personal or material injury during disposal of components. 

Summary of Contents for ULUF




























Reviews: