Arctiko ULUF Original Operating Instructions Download Page 10

Cooling system 

The ULUF range is fitted with a direct cooling system. The evaporator is an in-

tegrated part of the shelves in the appliance and divides the thermal radiation 

into levels inside the cabinet ensuring a uniformity of only ± 2°C. 

Single compressor technology

 

The Arctiko ULUF range also comes with a single compressor technology.

in comparison to the normal casade system, these appliances only needs 1 

compressor to reach the desired temperature. 

Dual cooling system (optional)

As an option you can purchase our ULUF models with dual cooling system. 

The dual cooling system is designed with two independent cooling cycles 

which offers optimal security of your stored products in the unlikely event of a 

failure in one of the cooling cycles. In case of failure, the other cooling cycle 

will serve as a backup, guaranteeing that your stored products will be kept at 

the set temperature. 

An Arctiko appliance which offers dual cooling system can be identified by the 

denomination of –D in the end of the model 

designation (e.g. ULUF 700-D).

Filterless construction

Arctiko’s single compressor system is designed as a filter-less system, which 

prevents problems caused by dust building up in the filter. This minimizes the 

maintenance of the cooling system and secures a more stable operation. 

18

Rating plate 

The rating plate is placed on the front right corner of the compressor 

compartment. On the small ULUF models (ULUF 65 and ULUF 125) it is placed 

on the back of the cabinet and on ULUF 15 it is placed on the right side. 

19

1.   Logo

2.  Contact information

3.  Model

4.  Voltage range 

 

5.  Refrigerant and charge

6.    WEEE  ”Waste  from  Electrical           

     and Electronic Equipment”

7.   Compressor type

8.  CE mark

9.   Weight in Kg

10.  Max ambient temperature

11.   Temperature. range 

12.  Serial no.

1

2

3

4

5

6

7

8

9

10

11

12

Oddesundvej   39

Summary of Contents for ULUF




























Reviews: