Arctiko BBR 950, Operating Instructions Manual

Page: 8 / 20

1. Solid and flat surface.
The appliance must be placed on a solid and flat surface, or excessive vibration and noise may be
produced when the appliance is in operation.
2. Away from heat source.
The appliance should be placed in an area away
from heat sources, including radiators, gas or
coal stoves, or the cooling efficiency of the
appliance may be reduced.
3. Away from sunlight.
The appliance may not operate properly if it is
under direct sunlight. Prolong exposure to sunlight
may shorten the service life of the appliance.
4. Dry.
The appliance should not be placed in a damp area.
5. Clean and tidy.
The appliance should be operated in an area free from chemicals, material, which might generate
gas or excessive dust.
6. Well ventilated.
The appliance should be placed in a well ventilated area. Poor ventilation may reduce the cooling
efficiency of the appliance.
7. Grounding.
Appliance must be grounded to prevent electrical
hazards.
8. Ensure that no article can fall on the top of the
appliance.
Location
The appliance should be located in an area where the following requirements can be satisfied.
Plug with a grounding pin
should be used for the
appliance to prevent electrical
shock.
Do not ground the appliance
to water pipes, as frequently
PVC pipes are used for water
supply system.
Do not ground the appliance
to gas pipes as this may
result in dangers.
Do not ground the appliance
to telephone lines or lightning
rods which may transmit
strong electrical current in
stormy days.
WARNING
CAUTION
Circuit breaker
If the appliance has to be used in a damp
area, a circuit breaker must be installed and
the appliance must be grounded. The circuit
breaker is installed in the power circuit.
Contact authorized retailer or technician of
the manufacturer for further information.
CAUTION
Do not place the appliance in an
area where foreign articles may
drop onto the appliance, as elec-
trical components are intalled on
the top of the appliance.
8