Arctiko BBR 950, Operating Instructions Manual, Page: 11 / 20

Operation Instructions
Warning, safety and detection
This appliance has warning, safety operation and detection functions.
Table 2 Warning and safety
Caution: Remote warning contact and sound warning indicator can be activated at the same time.
When the appliance warning mode is activated, pressing the buzzer button will disconnect the remote
warning contact. When the power is interrupted, the contact is in the warning mode until power
interruption status is lifted. All warning functions can reset automatically. If warning status is not
altered within 30 minutes, the buzzer and remote control contact will be activated again.
Warning /Safety
High temp
Low temp
Super temp
Power
interruption
Door ajar
Sensor back
after calibration
Abnormal
sensor
Phenomenon
Temperature detected by
upper or lower sensor 6°C
Temperature detected by
upper or lower sensor 2°C
Temperature detected by
sensor 8°C or 1°C
Power interruption or switch
off
External door ajar or open
Control panel off control
within 90 seconds
Upper sensor open or short
Lower sensor open or short
Defrosting circuit open or
short
Over temperature open or
short
Rechargeable battery
voltage low or abnormal
Buzz
Pulse warning
Pulse warning
Hi-temp warning
mode activated
Pulse warning for
72h power
interruption
Pulse warning
after 1min delay
Not affected
Pulse warning
/
/
/
/
Safe operation
Remote warning
contact activated
Calibration mode
finishes
Remote warning
contact activated
/
/
/
Not affected
Warning indicator
Warning indicator
blinks
Warning indicator
blinks
Warning mode on
and no further
instruction
Warning indicator
blinks; temp
display off
Warning indicator
blinks 1 min later
Test bottle temp
dislplay
Warning indicator
blinks; temp
display E1
/
/
/
/
>
=
>
>
>
=
>
=
>
=
11