8
8.
MEANING OF THE LEDS’
A series of light points on the front panels is used to monitor the loads controlled by the instrument.
Each LED function is described in the following table
.
9. HOW TO SELECT A CYCLE
1. Push the to move among the cycles C1, C2, C3, C4 and the holding cycle. The related symbol on the
display will be lighted and the cycle will be selected.
NOTE:
to pass from a cycle to another one simply push the key when the controller is in stand
–by mode.
HOLD PHASE:
To select
H
symbol pushing the .
Cycles are pre-set with the following values:
1.
Cy1:
for fast chilling and conservation of foods (hard +soft chill).
2.
Cy2:
for chilling and fast freezing of foods (hard +soft + freezing cycle).
3.
Cy3:
for direct fast freezing (only fast freezing cycle)
4.
Cy4:
for fast freezing avoiding ice skin (hard chill + freezing cycle)
5.
HLd:
hold mode function
6.
dEF:
for starting a manual defrost
2. Now the cycle is memorised and can be activated.
HOW TO MODIFY A CYCLE
1. Verify that none cycle is running. If one cycle is running stop it by pushing the key for 3s.
2. Push the to move among the cycles C1, C2, C3, C4 and the holding cycle. The related symbol on the
display will be lighted and the cycle will be selected
3. Hold push the key for several seconds till the display will show the first parameter of the selected cycle
(cyS) with its value.
4. Use the UP and DOWN keys to browse the parameters.
