Spa Boy Owners Manual
1.14.6 Arctic Spas Spa Boy Salt Dose Guidance Table
The following table identifies the dosage of Arctic Pure Sea Salt Blend that is required for each Arctic Spa model and estimated impact of
adding 225g of salt. Use this table for Spa Boy Version 1 R1.
Operating at the desired salt concentration will reduce potential corrosion and increase the life of the Spa Boy Output Electrode.
Arctic Spas - Spa Boy Version 1 R1 Salt Dosage Chart
Note: The above table provides a guideline to achieve a salinity level of 2200 ppm. Due to differing
levels of compounds and chemicals in water in different suburbs and countries, please ensure you confirm
salinity level is in the desired salinity range using Aquacheck Salt Test Strips
Spa Model
Litres
US Gal
Kg
Lb
225 Grams 1/2 lb
Fox
884
234
2.0
4.4
295 ppm
295 ppm
Glacier
1144
302
2.6
5.6
216ppm
216ppm
Glacier Xl
1300
343
3.0
6.6
190ppm
190ppm
Cub
1185
313
2.6
5.6
210ppm
210ppm
Klondiker
1431
378
3.2
7.1
173ppm
173ppm
Frontier
1330
351
3.0
6.6
188ppm
188ppm
Summit
1405
371
3.2
6.9
175ppm
175ppm
Summit XL
1988
525
4.5
10
122ppm
122ppm
Yukon
1360
359
3.1
6.7
180ppm
180ppm
Kodiak
1592
420
3.6
7.8
157ppm
157ppm
Norwegian
1565
413
3.5
7.7
157ppm
157ppm
Tundra
1700
449
3.8
8.4
147ppm
147ppm
Swim Spa (AWP)
5100
1347
11.4
25.1
49ppm
49ppm
Water Volume Metered Fill Point
(Approximately Bottom of Head Rest)
Required Salt Dosage to Achieve 2200ppm
(Salinity Range for Spa Boy Version 1 R1 must
be between 2000 ppm - 25000 ppm)
Estimated Impact of Adding Extra Salt
1.14.7 Sanitizer and pH Readings
The following provides guidance on the establishment and maintenance of sanitizer and pH readings.
Sanitizer Readings
You should have ORP sanitizer (Chlorine) readings within 24 hours.
24 hours post adding the salt to the spas water, My Arctic Spa will be able to provide accurate readings regarding the ORP sanitizer
(chlorine) reading, and pH reading.
Important:
Always check the pH and ORP (sanitizer) levels before each spa use.
If the pH reading is out of range (to high), adjust accordingly with
Arctic Pure, Salt Water Balance
* Expect the pH too increase slowly over each week and when the pH gets too high use
Arctic Pure, Salt Water Balance
to correct it.
High pH will cause premature failure of the Spa Boy Output Electrode, cloudy water, and decreased effectiveness of the sanitizer.
69
