manualshive.com logo in svg

Arctic Spas Arctic Fox, Owner'S Manual, Page: 58 / 124

Share
Download
Arctic Spas Arctic Fox Owner'S Manual Download Page 58

Jets

Two and a half Inch (2.5”) Jets

The Turbo Single jets

 give a wide circular massage. The 2.5 inch jets are designed for a thorough mas-

sage of the muscles in your upper back, shoulders and neck. These jets are adjustable by turning the face 

of the jet clockwise for a stronger flow and counter-clockwise for a softer flow and eventually off. The Jet can 

also be locked in the fully ON (open) position by turning the face of the jet clockwise until it does not go any 
further. Then rotate again to allow the jet to override the lock stop.

Four Inch (4”) Jets

The four-inch Hydro-massage jets 

give a wide circular massage. These jets are adjustable by turning the 

face of the jet clockwise for a stronger flow and counter-clockwise for a softer flow and eventually off. The 

Jet can also be locked in the fully ON (open) position by turning the face of the jet clockwise until it does not 

go any further. Then rotate again to allow the jet to override the lock stop.

Owners Manual - Core Series

58

58

Summary of Contents for Arctic Fox





























































































































Reviews:

No comments