8-6
MD2415
Handlebar Grip
REMOVING
1. Using a compressed air nozzle and low pressure,
peel up the inner corner of the grip.
2. Apply air pressure while twisting the grip
back and forth until it slides off the handlebar.
MD2448
INSPECTING
NOTE: Whenever a part is worn excessively,
cracked, or damaged in any way, replacement is
necessary.
1. Inspect the grip for wear, cuts, or cracks.
2. Inspect the grip for deterioration.
INSTALLING
NOTE: Before installing a handlebar grip, use
contact spray or alcohol to clean the inside of the
grip and the handlebar of glue residue, oil, or any
other contaminant.
1. Apply a liberal amount of Handlebar Grip
Adhesive to the inside of the grip.
2. Slide the grip onto the handlebar until it is fully
seated.
3. Wipe off any excess adhesive.
FOR ARCTIC CAT ATV DISCOUNT PARTS CALL 606-678-9623 OR 606-561-4983
www.mymowerparts.com
