Arctic Cat Bearcat 570 XT, Operator'S Manual

Page: 25 / 72

21
2. Unplug the electrical connector; then
remove the seat from the tunnel.
To install the seat, use the following pro-
cedure:
1. Place the seat into position on the
tunnel; then plug in the electrical
connector.
2. Rotate the seat latch either clock-
wise or counterclockwise and hold it
in that position; then slide the seat
forward, allow it to settle into posi-
tion, and release the latch to lock the
seat securely.
Bearcat XT Models
These snowmobiles are equipped with a
removable rear seat (and on the LTD
models, a removable third seat) to allow
for additional cargo space when no pas-
senger is being carried.

NOTE: If additional cargo is being
added, maximum weight on the snow-
mobile (operator/passenger/cargo)
should not exceed the maximum limi-
tation set for each snowmobile. See
the chart in the Suspension - Over-
load Springs sub-section in the Main-
tenance section for details. Also, the
overload springs should be engaged.
To remove the rear seat (and third seat on
the LTD models), use the following pro-
cedure:
1. Remove the four pins securing the rear
seat to the seat/Speedrack mount.
743-329A

NOTE: On the LTD models, also
remove the two pins securing the third
seat to the seat/Speedrack mount;
then lift the third seat up and away.
0745-131
2. Lift on the back of the rear seat and
move it rearward to remove it from
the mount.
To install the rear seat (and on the LTD
models, the third seat), use the following
procedure:
1. Place the rear seat into position on
the mount making sure the four pin
holes are properly aligned with the
mounting location on mount.
2. Install the four pins making sure
they are properly seated.

NOTE: On the LTD models, place
the third seat into position on the
mount making sure the two pin holes
are properly aligned with the mount-
ing location on the mount; then
install the two pins making sure they
are properly seated.
Towing
If the snowmobile is to be towed by
another snowmobile, do not tow using
the loops in the skis. The tow rope should
be attached to the spindles.
! WARNING
Make sure the rear seat is securely
locked in place before carrying a
passenger or personal injury may
result.
! WARNING
Make sure the rear seat (and on the
LTD models, the third seat) is
securely locked in place with the
pins before carrying a passenger or
personal injury may result.