Arctic Cat ATV 300 DVX Operator'S Manual Download | Manualshive

Page: 79 / 84

background image

77

Arctic Cat ATV Emission Control Warranty

Statement

Warranty Rights and Obligations

Arctic Cat Inc. (hereinafter referred to as Arctic Cat) and the California Air Resources
Board are pleased to explain the emission control system warranty for each new Arctic
Cat ATV sold in the state of California. In California, a new ATV must be designed, built,
and equipped to meet the state’s stringent anti-smog standards.

Arctic Cat warrants the emission control system on the Arctic Cat ATV for the periods
listed below provided there has been no abuse, neglect, or improper maintenance of the
ATV.

The emission control system may include components such as the carburetor, ignition
system, and crankcase ventilation system. Also included may be hoses, belts, connectors,
and other emission-related assemblies.

When a warrantable condition exists, Arctic Cat will repair the ATV at no cost to the owner,
including diagnosis, parts, and labor.

Emission Control Warranty Coverage

A new Arctic Cat ATV manufactured after January 1, 1997 has a two (2) year warranty on
its emissions control components.

If an emission-related component on the ATV is defective, the component will be repaired
or replaced by any authorized Arctic Cat ATV dealer.

Owner’s Emission Control Warranty Responsibilities

It is the owner’s responsibility to perform the required maintenance listed in the Operator’s
Manual. Arctic Cat recommends the retention of all receipts covering maintenance per-
formed on the ATV, but Arctic Cat cannot deny warranty solely for the lack of receipts or for
failure to ensure the performance of all scheduled maintenance on the emission control
system.

It is the owner’s responsibility to present the ATV to an authorized Arctic Cat ATV dealer
as soon as a problem exists. The undisputed warranty repairs should be completed within
a reasonable period of time, not to exceed thirty days.

The ATV owner should be aware that Arctic Cat may deny warranty coverage if either the
ATV or a component has failed due to abuse, neglect, improper maintenance, or any
unapproved modifications.

If you have any questions regarding your warranty rights and responsibilities, contact
either Arctic Cat Inc, P.O. Box 810, Thief River Falls, MN 56701, (218) 681-4999 or the
California Air Resources Board, 9528 Telstar Avenue, El Monte, CA 91731, (818) 575-
6800.

«
...
77
78
79
80
81
...
»

Summary of Contents for ATV 300 DVX





















































































Reviews:

No comments

Related manuals for ATV 300 DVX

Brand: Kellfri Pages: 16

POLAR TRAILER HD MAX 10535

Brand: Clam Pages: 12

WILD HP 300 - SERVICE

Brand: GAS GAS Pages: 65

Brand: KMW Pages: 98

VIPER 50 ST - SERVICE

Brand: E-TON Pages: 68

OFF ROAD AMBUSH iS

Brand: Bad Boy Pages: 156

Brand: Ifor Williams Trailers Pages: 16

Brand: Coleman Powersports Pages: 45

Brand: Bigab Pages: 42

Brand: Yamaha Pages: 92

Fourtax 300 4X4 1991

Brand: Honda Pages: 156

Brand: Honda Pages: 258

Brand: Schmeiser Pages: 28

Vaterra Chevrolet Camaro ZL1 2012

Brand: Horizon Hobby Pages: 19

Vaterra 1969 Chevrolet Corvette

Brand: Horizon Hobby Pages: 19

Vaterra 1969 Chevrolet Camaro RS

Brand: Horizon Hobby Pages: 19

EXL-50 - SERVICE

Brand: Eton Pages: 32

ATV3F-150 - SERVICE

Brand: Eton Pages: 34

Brands by name

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Popular brands

Load more brands