Arctic Cat 500 4x4, Operator'S Manual

Page: 47 / 76

���������� ����������� �������� �����������������
������ ��� ��
��������������� ��
������� ��� � ��� ����������
���������� ������������
Page 45
Registration Plate Light
To replace the registration plate
light bulb, use the following pro-
cedure:
1. Remove the two screws and
remove the lens.
2. Pull out the bulb.
3. Install the new bulb by
pushing it in.
4. Install the lens. Tighten the
two screws securely.
Turning Light or Taillight/
Brakelight
To replace the turning light or
taillight/brakelight bulb, use the
following procedure:
1. Rotate the socket counter-
clockwise and remove it from the
housing.
2. To remove the bulb from the
socket, push in and rotate counter-
clockwise.
3. To install the bulb, push in and
turn clockwise.
4. Insert the socket into the hou-
sing and rotate it clockwise.
Fuses
At the models 500/650 H1/700 Die-
sel the fuse box is to be found un-
der the seat.
q NOTE
To remove the fuse, compress the
locking tabs on either side of the
fuse case.
If there is any type of electrical
system failure, always check the
fuses first.
KM143B