3-32
TR108A
TR110A
9. Tighten the cap screws (from step 8) in a criss-
cross pattern to 7 ft-lb.
10. Install the shift detent ball, spring, and shift detent
bolt. Tighten to 35 ft-lb.
TR109A
11. Install the shift lever aligning the match marks;
then install the cap screw and tighten securely.
TR107A
Installing
Engine/Transmission
1. From the left side of the frame, install the
engine/transmission assembly.
2. Install the left front engine mounting bracket onto
the frame and tighten the cap screws to 29 ft-lb;
then install the three through bolts and nuts and
tighten to 29 ft-lb.
3. Install the drive sprocket, retainer, and retainer cap
screws. Tighten to 40 ft-lb. Install the drive
sprocket guard.
TR075A
NOTE: If the drive chain was loosened to remove
the sprocket, adjust drive chain (see Section 2).
4. Using a new grafoil gasket, install the exhaust
pipe/muffler assembly and loosely secure with the
mounting cap screws.
CAUTION
Do not draw the case halves together with the crank-
case cap screws. Damage to the case may occur.
Back to TOC
Back to Section TOC
Next
Back
FOR ARCTIC CAT ATV DISCOUNT PARTS CALL 606-678-9623 OR 606-561-4983
www.mymowerparts.com