Arcteq AQ-01 Instruction Manual Download Page 19

Page: 19 / 75

Table. 4.2.3 - 10. Descriptions of X2.

PPin no.

in no.

FFunction

unction

Self-supervision contact – closed (system alarm)

Self-supervision contact – common

Self-supervision contact – closed (system healthy)

Device charging – closed (device charging)

Device charging – common

Device ready – closed (device is not ready)

Device ready – common

Device ready – closed (device is ready)

Operation blocked – closed (the device is unblocked or de-energized)

Operation blocked – closed (common)

Operation blocked – closed (the device is blocked)

Trip contact

Auxiliary power supply – positive

Auxiliary power supply – negative

Table. 4.2.3 - 11. Descriptions for the fiber connectors.

FFiber connect

iber connectors

ors

Name

FFunction

unction

COM 1

The primary receiving fiber connector (blue)

COM 2

The secondary receiving fiber connector (black)

AQ 100 (Siemens)

Q 100 (Siemens)

Instruction manual

Version: 1.00

Summary of Contents for AQ-01











































































Search results

Summary of Contents for AQ-01

Reviews:

Arcteq AQ-01, Instruction Manual, Page: 19 / 75

Search results

Summary of Contents for AQ-01

Reviews: