OPERATION CONTROL AND CONNECTORS
12
4.2 Welding current adjustment
ArcoStick 180
Welding current range is 5
~
180A).
Arcostick series welders have the function of welding current pre-setting. Before
welding, the welding current display will show the amperage. It is convenient to set
parameters and adjust accurately.
4.3 Welding operation
4.3.1 Striking the arc.
Striking- Take the electrode upright to touch the workpiece, after forming a short
circuit, quickly lift about 2~4 mm, and arc will be ignited. This method is difficult
to master but with practice will provide good results.
electrode
workpiece
electrode
electrode
workpiece
workpiece
Take the electrode upright
The Electrode touch the workpiece
Lift up for about 2-4mm
upright
up
touch
2
~
4mm
Summary of Contents for ARCOSTICK MMA 180
Page 1: ......
Page 24: ...21 5 3 Electrical principle drawing 180 system chart ...