Arcoweld ARCOSTICK MMA 180, Operator'S Manual

Page: 19 / 27

OPERATION CONTROL AND CONNECTORS
16
cannot exceed normal standard.

·Take care that there is enough ventilation during welding. There is at least 30cm
free distance between the machine and wall.


4.8 Operational Notice

·Read 1 carefully before attempting to use this equipment.

·Connect the ground wire with the machine directly and refer to 3.5.

·Input power must be AC as one phase, 50Hz, 220V±10%.

· Do not touch the output electrode with any part of your body.

-Do not watch the arc in unprotected eyes.

·Ensure good ventilation of the machine to improve duty cycle

·Turn off the equipment engine when the operation is finished

·Do not restart equipment if it turns off due to internal failure until issue is
resolved.