5
B1100 Battery-Powered Tools (HK1211)
DRIVE UNIT:
Brushless direct current motor
WEIGHT:
3.9 lbs (1.7 kg) without battery or nose piece
4.4 lbs (2.0 kg) with battery
STROKE:
.985 in. (2.5 cm)
PULL CAPACITY:
1100 lb
BATTERY AND CHARGER:
18V battery; 100-240V/50-60Hz charger
Battery rated for 2.1 Ah
Optimum operating temperature range: 50-122°F (10°-
50°C)
Full charging takes approximately 40 minutes. (Charging
times may vary according to the remaining capacity and
the battery temperature.)
One battery can be charged approximately 1000 times.
One fully charged battery will install approximately 500
fasteners. Number of fastener installations may vary based
on the age of the battery and the size and strength of the
fastener.
The tool battery has a display showing battery life in
percent. Press the button in the display to activate the
green LED lights for approx. 5 seconds, and use the table
at right to determine capacity.
Principle of Operation
Description
The B1100 tool is designed to install up to -08
Aluminum BobTail fasteners and is compatible with
standard “L” version noses.
Specially designed for low-volume production
environments, these installation tools are portable,
with no hoses or cords. Batteries are easily replaced
and/or recharged when they have been depleted of
life.
11.22
(28)
2.99
(7.0)
1.06
(2.3)
2.68
(6.8)
11.42
(29)
1.5
(3.8)
4.45
(11.3)
inches
(cm)
3.08
(7.8)
2.75
(6.99)
The nose assembly is placed over the end of the
fastener until the tool’s anvil bottoms on the fastener.
W
hen the trigger is pressed, the drive unit draws the
collet rearward and breaks the pintail of the fastener
in tension.
After the fastener pintail is broken, the
trigger must be released, at which point the drive unit
returns the collet forward.
The tool is then ready for
the next fastener.
Specifications
INDICATOR
EXPLANATION
Constant
GREEN
Battery is fully charged.
Flashing GREEN
Battery is charging.
Constant RED
Charging temperature error (Battery
too hot or too cold)
Flashing RED
Battery is defective, or wrong battery
BATTERY CHARGER FUNCTION LIGHTS
BATTERY FUNCTION LIGHTS
INDICATOR
EXPLANATION
Battery is fully charged.
Battery is at 80% capacity.
Battery is at 60% capacity.
Battery is at 40% capacity.
Battery is at 20% capacity.
