INSTALLATION/OPERATION/MAINTENANCE INSTRUCTIONS FOR
ARCHON MODELS WD2010L, WD2010, WD2010H WASHDOWN STATIONS
Installation: 1004 Rev 4
Issued: February 7, 2013
4
B.
User’s Rating Inspection
The user is to confirm that:
1.
The washdown station conforms to the description on the user’s purchase order.
2.
The operating conditions described in the purchase order agree with the actual conditions at the installation site.
3.
The actual operating conditions at the installation site are within the application data shown on the Archon
Technical Data Bulletin or product proposal referred to above.
4.
The materials of construction of the washdown station are compatible with the contained fluid and surrounding
atmosphere in the specific application.
Important: If the performance data of the washdown station as received,
does not conform with any of the criteria above, do not proceed with
installation. Contact Archon for direction on what to do.
III.
INSTALLATION:
Use only qualified experienced personnel who are familiar with this equipment and thoroughly understand all the
instructions in this manual for the installation of this equipment.
Refer to Archon dimension sheets or Archon product proposal to obtain dimensional information for the specific
washdown station. Check Figure 1 for the location of the liquid supply, steam inlet, and liquid outlet connections to
insure correct hookup.
Figure 1
Hose Rack
Diaphragm
preventing
accidental
steam
discharge
Mixture Outlet
Steam Control Valve
Check Valve
Steam Valve
Thermometer
Water Control Valve
Venturi Jet Mixer
Check Valve
Flow Sensor