31-DVIM33
14
GLASS DOOR REMOVAL AND REPLACEMENT
CAUTION: Do not attempt to remove the glass door when the appliance is hot
.
1.
Just above the door frame reach in and pull the two finger rings forward (see figure 1).
2.
Pull and lift the finger rings to detach from the door frame (see figure 2).
3.
Pull the door forward until the bottom catches release.
4.
Lift door up and away.
5.
To replace the door line up the two bottom catches with the notches on the fireplace.
While pushing evenly on the bottom of the door lift up on the top of the door until it
engages.
6.
Push down on the top of the door to ensure the door is seated all the way down on the
catches.
7.
Pull the finger rings out and down to engage in the slots on the top of the door frame.
8.
Push the finger rings back in.
IF YOUR GLASS BREAKS
WARNING
: Do not operate appliance with the glass front cracked or broken. Replacement of
the glass should be done by a licensed or qualified service person.
In the event your glass cracks or breaks, Archgard recommends that a new door assembly be
ordered to replace the original door.
Remove door as per the instructions above.
Replace with new door assembly.
NOTE: the NEW door will emit some odor when the appliance is re-lit and the odor will dissi-
pate after the gasket material within the door has cured.
Warning
: Do not use substitute glazing materials
FIGURE 1
FIGURE 2
