The current requirement in order for safe operation of this machine is 16 Ampheres. You will need to have a certified
electrician to connect a 16 Amp fuse, if there is not enough current load.
Your washing machine is set to 230 Volts.
Do not forget to check the grounding in all cases of use with or without the transformer. Our company will not be
responsible for any damages caused by operations without grounding.
In order to bring the machine to ready before use, please call your service technician or a certified plummer.
Your washing machine’s front door is designed reversible. To change the front door’s opening direction please call your
service.
Please perform the first wash with detergent and do not place clothing inside your washing machine. This will ensure that
any left over dirt from production will be cleared from inside of your machine.
The performance of the washing machine depends on the effectiveness of the cleaning agent. Stains can be permanent
if low quality detergents are used. Please take necessary effort to clean the stained clothes as described in following
pages before washing them in the machine.
1
Make sure the on/off switch is in the off position and always allow one to two minutes
for the door safety lock to release the lock. Pull the handle to open the door.
S t e p s b e f o r e o p e r a t i n g F u l l a u t o m a t i c
Wa s h i n g M a c h i n e a n d s a f e t y p r e c a u t i o n s
P a r t 1 :
To open the front door
Due to the quality control processes during production, there may be some
water left over in your machine. This does not cause any damage to your
product.
