26
Note:
Ref. your plasma power source handbook for rec-
ommended Torch Height (proper value of PIERCE
TIME) for different thickness.
Till now, one whole cutting process for auto
-
pneumatic THC mode has been down. You can
do more practice to get more experience for a
better and perfect cutting result by adjust those
setting according to the instructions and notes
above.
Pneumatic THC Lifter to replace AV
THC Lifter
；【
Cooling cap
】
Installation when using
【
Cooling cap
】:
The Cooling cap is directly set in the plas-
ma torch and then bolted; then the water
pipe installed in the Cooling cap;
