13
Assembling Step
Air Pressure connection for THC Lifter:
Step 10: Connect the air pressure tube to the air compressor.
Note:
Both the Arc voltage and the Pneumatic THC mode need air pressure to keep the THC Lifter of Stinger on the proper
position.
Torch loading
：
Step 12: Load the plasma torch to the holder.
IHS wire Connection:
Step 13: Connect the IHS wire to the shield of the plasma torch.
Plate loading
：
Step 11: Turn on the power supply of the Controller, Go to
Manual interface and Move the gantry to the other end of the
tracks. Load the thick plate onto the water table.
