CR100
E-20
Mode key IR punch-
through
The Mode key IR punch-through
default is ‘on’.
Example: To set the Mode key IR
punch-through to aMP
1. Press and hold
�����
until the power
LED blinks twice:
.
2. Press
�
�
�
. The power LED
blinks twice:
.
3. Press
���
to punch through IR
from it.
Now, whenever you press and release
a Mode key, the IR data assigned to
aMP
is transmitted, no matter what
the current mode is (i.e. it ‘punches
through’ any other device).
To cancel Mode key IR punch-
through:
1. Press and hold
�����
until the power
LED blinks twice:
.
2. Press
�
�
�
. The power LED
blinks twice:
.
3. Press
�����
until the power LED
blinks twice:
.
Resetting the
CR100
Resetting the CR100 will erase all
learned functions across all modes,
as well as some other programmed
functions like Macros. It will not reset
the Device Mode keys; these will
remain programmed to your choice of
component.
1. Press and hold
�����
until the power
LED blinks twice:
.
2. Press
�
�
�
. The power LED
blinks four times:
.
Summary of Contents for CR100
Page 1: ...Handbook CR100 CR100 remote control English ...
Page 41: ...CR100 41 ...