E
n
g
li
s
h
CR100
E-19
Here are the factory default settings:
Mode
Default
Status
Default Arcam
codes
DVD mode
Locked
0762
SAT mode
Unlocked
0877
AV mode
Unlocked
0586
TUN mode
Locked
2009
AMP mode
Locked
1956
AUX mode
Locked
2004
VCR mode
Unlocked
0111
CD mode
Locked
0680
Alternative codes are available for
multi-room solutions, or in the
case of code clashes with other
manufacturer’s products.
For example:
DVD (system code 12) 1655
AMP (system code 19) 1371
You will need to change the system
code on the product you wish to
control, as well as the CR100.
note
: aMp mode is permanently
locked; it will only control arcam
Amplifiers.
To toggle a Device Mode lock setting:
1. Press the Device Mode key you
want to unlock (e.g.
���
)
2. Press and hold
�����
until the power
LED blinks twice:
.
3. Press
�
�
�
.
<
The power LED blinks twice when
being locked, and blinks four
times when being unlocked.
<
If you enter an invalid key
sequence, the power LED gives
one long blink and returns to
normal operation.
While the Device Mode key is locked,
the Direct Code Setup and Move
Mode functions are not available.
Volume punch-through
Volume punch-through means that,
no matter which Device Mode is
selected, the CR100 controls the
Amplifier volume�� You don’t need to
press
���
on your CR100. This feature
is switched on by default.
There are times, however, when
you might want to control a device’s
volume directly when in a specific
Device Mode.
Example: To cancel volume
punch-through for a TV (aV
mode)
1. Press
��
once.
2. Press and hold
�����
until the power
LED blinks twice:
.
3. Press
�
�
�
.
4. Press
. The power LED blinks
four times.
Now, while in TV (AV) mode, you will
be able to control the volume or mute
functions of your TV directly.
To completely cancel all volume
punch-through settings
1. Press and hold
�����
until the power
LED blinks twice:
.
2. Press
�
�
�
.
3. Press
. The power LED blinks
four times
.
Now, whichever mode you’re in, you
will have direct access to that device’s
volume or mute functions, assuming
they are available. You would need
to switch to
aMP
mode to alter the
Amplifier volume��
Example: To restore default
volume punch-through settings in
VCR, dVd, aMP and SaT mode
1. Press and hold
�����
until the power
LED blinks twice:
.
2. Press
�
�
�
.
3. Press
���
. The power key LED
blinks twice:
.
Summary of Contents for CR100
Page 1: ...Handbook CR100 CR100 remote control English ...
Page 41: ...CR100 41 ...