E
n
g
li
s
h
CR100
E-13
aUX mode
���
Toggles power between
stand-by and on.
�
to
�
Functions as original
remote number key.
����
Selects Tape input on
amplifier
���
(not used)
�����
Modifies many keys (see
individual key descriptions,
below)
���
Selects multichannel
(MCH) input on amplifier
���
(not used)
Navigate setup and
programme selection
menus.
ok
confirms a
selection.
Confirms a setting
(equivalent to ‘Enter’ or
‘Select’ on some remotes)
Behaviour of all other CR100 keys
in AUX mode depends on the type
of auxiliary device. Refer to the
appropriate table for the device.
By default, AUX mode has been set
up for future ARCAM products.
The AUX control page can be
assigned for use with a DVD or VCR
player using the following method:
1. Unlock the code page (this is
described on page 18 – ‘Locking/
Unlocking a specific device
mode’).
2. The functions of AUX mode can
now be replaced by those of a
DVD or VCR by changing the
four-figure device code (this
is also explained on page 18
– ‘Mode Mover’).
3. Now lock the mode so the
new settings are not changed
inadvertently.
Summary of Contents for CR100
Page 1: ...Handbook CR100 CR100 remote control English ...
Page 41: ...CR100 41 ...
