CI Guide AV8/9 V1
Page
6 of 7
Pembroke Avenue, Waterbeach, Cambridge, CB5 9QR, England
Tel +44 (0) 1223 203200 Fax +44 (0) 1223 863384
General Notes
1 Although the 3.5mm Stereo Zone 1 and 2 inputs provide a
+12v
regulated power supply from a power source within the AV8/9, the
maximum current that will be available is
100mA
as such power hungry
devices such as keypads should be connected to external regulated
powers supplies (wall warts).
2 Ensure that all custom made
3.5mm
phono link cables are correctly
prepared and stable as the system will only be as reliable as its
weakest link.
Please see
the Reliability concerns section towards the back of the
guide for further information.
CR80 remote Aux page as Amplifier system code 19
1: Press The <
AUX
> device key once only.
2: Press and hold <
SET
> until the LED blinks twice, then release.
3: Enter the set-up code <
1213
> the led will blink twice.
4: Press <
SET
> to lock in the set-up code.
You may now reassign either Zone 1 or 2 as RC5 19 within the AV8 engineering
menu please see page 7
Please note:
Only major functions are available from the AUX RC5 19 page of the
CR80 these include Source selection and Volume up and down, you made need to
load any missing and required RC5 19 codes into the CR80 from and external
discrete code learning remote such as a Pronto.
