CI Guide AV8/9 V1
Page
3 of 7
Pembroke Avenue, Waterbeach, Cambridge, CB5 9QR, England
Tel +44 (0) 1223 203200 Fax +44 (0) 1223 863384
Engineering Menu
(It is possible to change the remote control protocol from 16 to 19 for zone 1
in this menu and toggle between remote off/on modes)
To enter this menu press buttons
CD + DVD + OK
then press the
THX
button
Use the arrow keys to scroll through the menu and the volume control to
change the setting. See diagram below
DVD
SAT
AV
VCR
PHONO/AUX CD
TUNER
TAPE
DVDA
THX
UP
MODE
DOWN
EFFECT
DISPLAY
MENU
OK
The menu will appear as below.
16* RC5 Zone 1
<default>
Option on RC5 system code 19
16* RC5 Zone 2
<default>
Option on RC5 system code 19
Scrolling Messages
Dealer demonstration tool with various messages
HQ Video OSD
<on/off>
OSD insert on HQ option
Restore Defaults
<on/off>
Restores AV8 too original factory settings
Diagnostics
<on/off>
RS232 Control Only – Arcam use only
Front Panel IR RX
<on/off> Option to disable front panel IR reception
Exit
<Press OK to exit>
Exit menu
Rear panel trigger lead configuration
This lead allows the AV8/9 to power toggle on/off the P7 Amplifier and Zone 2
as well (The menu must be setup)
AV8
Zone 1
Mono
Zone 2
Mono
Zone 1
Zone 2
0V
Zone 1
Zone 2
OV
0V
AV8 trigger output Zone 1 and Zone 2 - 3.5mm configuration.
