CI Guide AV8/9 V1
Page
5 of 7
Pembroke Avenue, Waterbeach, Cambridge, CB5 9QR, England
Tel +44 (0) 1223 203200 Fax +44 (0) 1223 863384
RC5 remote command identification
This is a particularly useful
diagnostic tool
and can be used to identify RC5
commands from all Arcam and Non-Arcam devices
To enable this facility press the following buttons <
Phono + DVD + Effect
>
the front panel display will then indicate “Show RC5 Command On” to disable
press buttons <
Phono + DVD + Effect
> again. See diagram below.
DVD
SAT
AV
VCR
PHONO/AUX CD
TUNER
TAPE
DVDA
THX
UP
MODE
DOWN
EFFECT
DISPLAY
MENU
OK
Set-up menu lock (available from V3 software onwards)
When working with the AV8/9 you have access to a
Menu Lock
function, this
is a particularly useful function and allows the installer to safe guard his
calibrations and system set-up configurations.
To switch the lock on press and hold the
<OK + Tuner + DVDA>
buttons the
AV8/9 will display
Set-up Menus Locked
on the display, the customer will still
be able to enter the set-up menus although he/she has no access to the set-
up options.
DVD
SAT
AV
VCR
PHONO/AUX CD
TUNER
TAPE
DVDA
THX
UP
MODE
DOWN
EFFECT
DISPLAY
MENU
OK
You may un-lock the menus by pressing
<OK + Tuner + DVDA>
again, the
display will now show
Set-up Menus Unlocked
.
