ARC A015, User Manual

Page: 7 / 16

FITTING THE OVEN INTO THE KITCHEN CABINETS
Fit the oven into the space provided in the kitchen unit; it may be fitted
underneath a bench top or into a tower cupboard. Fix the oven in position by
screwing into place, using the two fixing holes in the frame. To locate the fixing
holes, open the oven door and look inside. To allow adequate ventilation,
the measurements and distances adhered to when fixing the oven .
If the oven is to work properly, the kitchen housing must be suitable. The
panels of the kitchen unit that are next to the oven must be made of a heat
resistant material. Ensure that the glues of units that are made of veneered
wood can with stand temperatures of at least 120 o C. Plastics or glues that
cannot withstand such temperatures will melt and deform the unit, once
the oven has been installed in the kitchen cabinets, electrical parts must
be completely insulated. This is a legal safety requirement. All guards must
be firmly fixed into place so that it is impossible to remove them without
using special tools. Remove the back of the kitchen unit to ensure an
adequate current of air circulates around the oven.
DECLARATION OF COMPLIANCE
When you have unpacked the oven, make sure that it has not been damaged
in any way. If you have any doubts at all, do not use it: contact a authorised
qualified person. Keep packing materials such as plastic bags, polystyrene, or
nails out of the reach of children because these are dangerous to children.
SAFETY TIPS
• Opening the oven door - always hold the handle in the centre, trying to
open from the left or right side will make opening more difficult.
• Hot surfaces - remember that during use the oven gets hot, use caution
when using the oven.
• Removing dishes & shelves - Use of oven gloves or similar is
recommended when removing dishes , pans or shelves from the oven.
6