Doc No. 740048
6
MODEL 96
TUBE TO TUBESHEET WELD HEAD
OPERATION MANUAL
3.0 CABLE HOOK UP
(contd.)
3.2 To connect the male to female (chrome) gas fittings, unscrew the
(4-40) socket head screw to allow the latch to open far enough to fully
seat the two fittings. Once the fittings are latched together, lightly
tighten this screw to prevent accidental disconnection. See fig. 2.
Fig. 2
3.3 Connect the motor control connector by aligning the key to the slot,
and lightly tightening the outer ring. Be careful not to cross-thread this
ring. See fig. 3.
Fig. 3
