Arbor Technology IEC-3902, User Manual

Page: 45 / 62

- 35 -
BIOS
Keystroke Function
◄ ►
Move to highlight a particular configuration screen from
the top menu bar / Move to highlight items on the screen
▼ ▲ Move to highlight previous/next item
Enter Select and access a setup item/field
Esc
On the Main Menu – Quit the setup and not save changes
into CMOS (a message screen will display and ask you
to select “OK” or “Cancel” for exiting and discarding
changes. Use “←” and “→” to select and press “Enter” to
confirm)
On the Sub Menu – Exit current page and return to main
menu
Page Up / +
Increase the numeric value on a selected setup item /
make change
Page Down / - Decrease the numeric value on a selected setup item /
make change
F1 Activate “General Help” screen
F10
Save the changes that have been made in the setup and
exit. (a message screen will display and ask you to select
“OK” or “Cancel” for exiting and saving changes. Use “←”
and “→” to select and press “Enter” to confirm)
Key Commands
BIOS Setup Utility is mainly a key-based navigation interface. Please refer to
the following key command instructions for navigation process.
System Time
Set the
system time. Use Tab to switch between Time
elements.
►
The time format is: Hour: 00 to 23
Minute: 00 to 59
Second: 00 to 59