Arbor Technology IEC-3902, User Manual

Page: 57 / 62

- 47 -
BIOS
5.3.2.1 PCI Express Configuration
Setting Description
PCIE1, 2 3 &
MC1, 2
Enable (default) or disable PCIE3/1/2 and MC1/2.
Topology
Identify the SATA Topology if it is default, ISATA , Flex,
DirectConnect or M2.
►
Options: Basic specific , Unknown , x1 (default), x4, Sata
Express and M2
ASPM
Disable or set the ASPM level. Force L0s will force all inks to
L0s state. “Auto” will allow BIOS to auto configure.”Disable”
will disable ASPM.
►
Options: Disabled (default), L0s , L1 , L0sL1 and Auto .
Hot Plug
Enable or disable (default) PCI Express Hot Plug.
PCIe Speed
Select PCI Express port speed.
►
Options: Auto (default), Gen1 , Gen2 and Gen3
5.3.2.2 SATA Configuration
Setting Description
SATA Controller`(s) Enable (default) or disable SATA Device.
SATA Mode Selection
Determines how SATA controller(s) operate.
►
Options: AHCI (default) and RAID
Port 0/1
Enable or disable (default) SATA Port.
Hot Plug
Enable or disable (default) the port as pluggable.
SATA Device Type
Identify the SATA port is connected to Solid State Drive or
hard Disk Drive.
►
Options: Hard Disk Drive and Solid State Drive
(default).