Arbor Technology IEC-3902, User Manual

Page: 50 / 62

- 40 -
BIOS
USB Transfer time-out
Use this item to set the time-out value for control, bulk, and
interrupt transfers.
Options available are: 1 sec, 5 sec, 10 sec, 20 sec
(default)
Device reset time-out
Use this item to set USB mass storage device start unit
command time-out.
Options available are: 10 sec, 20 sec (default) , 30 sec,
40 sec
Device power-up delay
Use this item to set maximum time the device will take before
it properly reports itself to the host controller.
Options available are:
Auto
(Default): ‘Auto’ uses default value: for a root port
it is 100 ms, for a hub port the delay is taken from hub
descriptor.
Manual : Select Manual you can set value for the
following sub-item: ‘ Device Power-up delay in
seconds
’, the delay range in from 1 to 40 seconds, in
one second increments.