Arbor Technology Gladius G1050 Series, User Manual

Page: 72 / 137

- 58 -
Getting Started
2.11.15. Install GPS Driver & Utility (Configure-to-Order)
Since the GPS shares the module with RS232 (GRS-1050 - GPS & RS232 2-in-1 kit),
install the GPS driver after the RS232 driver is installed so the two can run without
problem.
To install the GPS driver:
1. Install the RS232 driver as described in 2.11.14. Install RS232 Driver (Configure-to-
Order) on page 57 first.
2. Install the GPS driver - Click/tap the GPS icon from the driver list.
3. Follow the onscreen instructions to proceed.
4. Install the utility for the GPS module. Go to http://www.u-blox.com/en/evaluation-
tools-a-software/u-center/u-center.html and download the u-center GPS evaluation
software.
5. Connect the computer to the Internet since the installation of this utility requires the
computer to be online.
6. Run the downloaded software on the computer, which will install the GPS utility,
u-center .
Once the utility is successfully installed, a shortcut will show up on the desktop
and also at Start button | All Programs | u-blox | u-center | u-center .
See 3.7. Use GPS (Configure-to-Order) on page 76 to know how to use the GPS.