Arbor Technology Gladius G1050 Series User Manual Download Page 66

Page: 66 / 137

- 52 -

Getting Started

2.11.11. Install Cradle LAN Driver (Optional)

If you have purchased a cradle for the computer, install the cradle LAN driver on the

computer so the computer is able to network with the cradle’s LAN port.

To install the cradle LAN driver:

1. Connect the cradle to power supply.

power outlet

power cable

power adapter

cradle

2. Seat the computer in the cradle.

The pogo

contact pins

must meet.

3. Power on the computer. Launch the driver installer onscreen as described in

2.11.2.

Start to Install

on page

and open the driver list.

The driver list then opens onscreen.

Summary of Contents for Gladius G1050 Series










































































































































Search results

Summary of Contents for Gladius G1050 Series

Reviews:

Related manuals for Gladius G1050 Series

Brands by name

Popular brands

Arbor Technology Gladius G1050 Series, User Manual

Search results

Summary of Contents for Gladius G1050 Series

Reviews:

Related manuals for Gladius G1050 Series

Brands by name

Popular brands