Arbor Technology Gladius G1050 Series User Manual Download Page 100

Page: 100 / 137

- 86 -

Utilities

5. Hit the function key that is assigned to trigger scanning as described in

step 1

The system shows that barcode scanner is on

, and the scanning

light beams. The barcode scanner is ready to read any supported printed barcode

within the reach of the scanning light.

If the printed barcode is successfully read, the barcode will be encoded and the

encoded data will be shown in the text editor that you have launched in

step

Note: The scanning light will stay on for 10 seconds. If there is no barcode within

the reach of the scanning light and no barcode is read within 10 seconds, the

scanning light auto-stop after 10 seconds.

Summary of Contents for Gladius G1050 Series










































































































































Search results

Summary of Contents for Gladius G1050 Series

Reviews:

Related manuals for Gladius G1050 Series

Brands by name

Popular brands

Arbor Technology Gladius G1050 Series, User Manual

Search results

Summary of Contents for Gladius G1050 Series

Reviews:

Related manuals for Gladius G1050 Series

Brands by name

Popular brands