Arbor Technology EmCORE-v7002, User Manual

Page: 47 / 57

BIOS
- 43 -
BIOS
- 44 -
Typing "Y", you will quit the setup utility and save all the changes into the
CMOS memory. Typing "N", you will return to Setup utility.
Useing Password to set a password that will be used exclusively on the
system. To specify a password, highlight the type you want and press
<Enter>. The Enter Password: message prompts on the screen. Type the
password, up to eight characters in length, and press <Enter>. And the
system confirms your password by asking you to type it again. After setting
a password, the screen automatically returns to the main screen. To disable
a password, just press the <Enter> key when you are prompted to enter the
password. A message will confirm the password to be disabled. Once the
password is disabled, the system will boot, then you can enter BIOS Setup
freely.
3.12 Set Password 3.13 Save & Exit Setup
3.14 Exit Without Saving
Typing "Y" will quit the Setup utility without saving the modifications. Typing
"N" will return you to Setup utility.