Arbor Technology EmCORE-v7002, User Manual

Page: 42 / 57

BIOS
- 39 -
BIOS
- 40 -
Maximum payload Size
In this field, you can configure the maximum payload size for your system.
Setting: 4096 (default)
Maximum ASPM supported
Control maximum level of active state power management ASPM) supported
on the given PCI Express links on the system. Usually, please do not rejigger
the default setting.
Setting: L0s & L1 (default)
Resources Controlled By
This PnP BIOS can configure all of the boot and compatible devices with the
use of a PnP operating system.
Setting: Auto(ESCD) (Default), Manual.
IRQ Resource
It allows you to configure the IRQ Resources. This selection set by the
designer.
DMA Resources
It allows you to configure the IRQ Resources. This selection set by the
designer.
PCI/VGA Palette Snoop
Some non-standard VGA display cards may not show colors properly. It
allows you to set whether or not MPEG ISA/VESA VGA cards can display
with PCI/VGA. When Enabled , a PCI/VGA can display with an MPEG ISA/
VESAVGA card.When Disabled , a PCI/VGA cannot display with an MPEG
ISA/VESAVGA card.
Setting: Disabled (Default), Enabled.
Assign IRQ For VGA
Assign IRQ resource for VGA ,you can Disable or Enable it.
Setting: Enabled (Default), Disabled.
Assign IRQ For USB
Assign IRQ resource for USB device ,you can Disable or Enable it.
Setting: Enabled (Default), Disabled.
3.9 PC Health Status
This section show you CPU Health Status of system.
CPU Warning temperature
This item allows you to set up the CPU CPU Warning temperature.
Setting: Disabled (Default).
Shutdown Temperature
This item allows you to set up the CPU shutdown Temperature. This item
only effective under windows 98 ACPI mode.
Setting: Disabled (Default).