Arbor Technology ARTS-1450, User Manual

Page: 69 / 89

- 59 -
BIOS
5.4. Power
The Power menu sets up the power option of system
Determines the action taken
when the system power is off
and a PCI Power Management
Enable wake up event occurs.
Advanced Security Boot Exit
Main
Wake on PME <Disabled>
State After G3 <S5 State>
Power Delay Function <Enable>
Power on delay <04 Seconds>
Power off delay <Manually Operator>
Wake system from S5 <Disabled>
Change Values F5/F6
Select

SubMenu Enter
Select Item
Select Menu
F1
Exit ESC
Help Setup Defaults F9
Save and Exit F10
InsydeH20 Setup Utility Rev. 5.0
Power
Setting Description
Wake on PME
Enables or disables Wake on PME.
Determines the action taken when the system power is off and a PCI
Power Management Enable wake up event occurs.
State After G3
Set the state of System when power is re-applied after a Power failure
(G3 state)
► Options are S0 State/S5 State(default)
Power Delay Function
Sets the system support power delay function.
Enable
(default) or
Disable
the power delay function.
Power on delay
Select the time which the system will power on
► Options are Manually Operator/04 Seconds(default)/
08 Seconds/16 Seconds
Power off delay
Select the time which the system will shutdown
► Options are Manually Operator(default)/30 Seconds/
60 Seconds/90 Seconds
Wake system from S5
Enables or disables system wake on alarm event.
When enabled, system will wake on the hr::min::sec specified.