manualshive.com logo in svg

Arbor Technology ARTS-1450, User Manual

Share
Download
Arbor Technology ARTS-1450 User Manual Download Page 19

- 9 -

Getting Started

2.2. Take A Tour

The computer has some I/O ports, status LED light and controls on the front and rear 

panel. The following illustrations show all the components called out .

Front View

⑥

⑤

②

①

⑦

③

④

➊

➋ ➌

➍ ➎ ➏

Status LED Lamps

Antenna holes 

stopped up by 

plugs

⑧

• 

I/O

No. Description

No. Description

①

Power button

⑤

Antenna holes stopped up by 

plugs

②

Reset button

(accessible with a pin)

⑥

SD card slot

③

USB 3.0 port

⑦

SIM1/2 card slots

④

DIO port

⑧

LED Indicators

• 

Status LED Lamps:

No.

LED

Color

Description

➊

Red

This LED flashes red when SSD is being accessed.

➋

Blue

This LED lights/flashes blue when 3G is on/communicating.

➌

Blue

This LED lights/flashes blue when 3G is on/communicating.

➍

Green This LED lights green when Power is on.

➎

Green

This LED lights/flashes green when GPS is on/communicating.

➏

Green

This LED lights/flashes green when WiFi is on/communicating.

Summary of Contents for ARTS-1450


























































































Reviews:

No comments

Brands by name

Popular brands

Load more brands