Arbor Technology ARES-1231 Series, User Manual

Page: 83 / 94

- 73 -
BIOS
Key Commands
The BIOS Setup utility relies on a keyboard to receive user’s instructions. Hit the following
keys to navigate within the utility and configure the utility.
Keystroke
Function
← →
Moves left/right between the top menus.
↓ ↑
Moves up/down between highlight items.
Enter
Selects an highlighted item/field.
Esc
On the top menus:
Use
Esc to quit the utility without saving changes to CMOS. (The screen
will prompt a message asking you to select
OK
or Cancel to exit discarding
changes.
On the submenus:
Use
Esc to quit current screen and return to the top menu.
F5
Increases current value to the next higher value or switches between available
options.
F6
Decreases current value to the next lower value or switches between available
options.
F1
Opens the Help of the BIOS Setup utility.
F9
Restore the Setup Default (The screen then prompts a message asking you to
select
OK
or Cancel to restore to default.)
F10
Exits the utility saving the changes that have been made. (The screen then
prompts a message asking you to select
OK
or Cancel to exit saving changes.)
Note: Pay attention to the “WARNING” that shows at the left pane onscreen when making
any change to the BIOS settings.
This BIOS Setup utility is updated from time to time to improve system performance and
hence the screenshots hereinafter may not fully comply with what you actually have
onscreen.