Arbor Technology ARES-1231 Series User Manual Download Page 73

Page: 73 / 94

- 63 -

Installation & Maintenance

To install a memory module:

1. Access the bottom board of the computer as described in in

4.1. Disassemble the

Computer

on page

2. To remove the existing memory module for replacement with a new one, carefully

release the latches on the side of the module holder. Then gently slide the module
out of the socket.

Release the latches

Confront the memory module’s edge connector with the SO-DIMM slot connector.
Align the memory module’s key notch at the break on the SO-DIMM slot connector.
By a slanted angle, fully plug the memory module until it cannot be plugged any
more.

Aligh the memory module’s key notch at the
SO-DIMM slot connector's break.

memory
module’s key
notch

SO-DIMM slot
connector's
break

Summary of Contents for ARES-1231 Series































































































Search results

Summary of Contents for ARES-1231 Series

Reviews:

Related manuals for ARES-1231 Series

Brands by name

Popular brands

Arbor Technology ARES-1231 Series, User Manual

Search results

Summary of Contents for ARES-1231 Series

Reviews:

Related manuals for ARES-1231 Series

Brands by name

Popular brands